Product
ACOPTIC - FTTH - MCD1536
Micro drop cable for micro-duct 3.5/5
Benefits
- Composite sheath with low friction coefficient (2.5 times lower than HDPE) for better sliding in the duct.
- Very compact (diameter: 1.6mm), they can contain up to 6 fibres.
- The cables can be blown over several hundred metres through ducts with an internal diameter of 3.5mm (MDD1824).
Applications
- ACOPTIC® is ACOME’s brand of optical cable solutions dedicated to Telecom networks.
- MCD micro-cables are designed for installation by blowing through micro-ducts.
- The MCD1536 range represents our solution for connecting subscribers to the Telecom access network infrastructure.
General characteristics
- Optical fibres: 1, 2, 4 or 6 coloured single-mode optical fibres - Optical fibres without electrostatic effect
- Interior layer: Peelable thermoplastic sheath
- Outer jacket: Thermoplastic envelope, with low-friction coefficient - Nominal diameter: 1.6mm
Color Code
Norms and standards
General standards
- CEI/EN 60793
- CEI/EN 60794-1
- EN 50167
- EN 50168
- EN 50169
- EN 50173
- ISO/IEC 1801
- IEC 801.2
- IEC 801.3
- IEC 801.4
- NF/EN 55022
- NF/EN 55024
Recommendations
Storage and installation
- The cables are supplied with protective wrapping that must be maintained until the product has been fully used.
- The rules for storage, transport, and cable laying are described in our ACOPTIC Guide.
Related products
Micro-câble soufflable Haute Densité - Pose en micro-conduites - Jusqu'à 288 fibres - Extérieur.
Micro-LT Mini-cables for blowing into micro ducts 250µm fibre, M12, from 96 to 288 fibres
