ACOPTIC - FTTH - MCD1536

Micro drop cable for micro-duct 3.5/5 MCD1536

Benefits

  • Composite sheath with low friction coefficient (2.5 times lower than HDPE) for better sliding in the duct.
  • Very compact (diameter: 1.6mm), they can contain up to 6 fibres. 
  • The cables can be blown over several hundred metres through ducts with an internal diameter of 3.5mm (MDD1824).

 

Applications

  • ACOPTIC® is ACOME’s brand of optical cable solutions dedicated to Telecom networks.
  • MCD micro-cables are designed for installation by blowing through micro-ducts.
  • The MCD1536 range represents our solution for connecting subscribers to the Telecom access network infrastructure. 
     

General characteristics

code couleurs MCD1536

  1. Optical fibres: 1, 2, 4 or 6 coloured single-mode optical fibres - Optical fibres without electrostatic effect
  2. Interior layer: Peelable thermoplastic sheath
  3. Outer jacket: Thermoplastic envelope, with low-friction coefficient - Nominal diameter: 1.6mm
Color Code

code couleurs MCD1536

 

Norms and standards

General standards
  • CEI/EN 60793
  • CEI/EN 60794-1
  • EN 50167
  • EN 50168
  • EN 50169
  • EN 50173
  • ISO/IEC 1801
  • IEC 801.2
  • IEC 801.3
  • IEC 801.4
  • NF/EN 55022
  • NF/EN 55024

 

Recommendations

Storage and installation
  • The cables are supplied with protective wrapping that must be maintained until the product has been fully used. 
  • The rules for storage, transport, and cable laying are described in our ACOPTIC Guide.

 

You want more information ?

Related products

See also

Telecom networks and FTTH

ACOME at the UFB Summer University

ACOME presents its innovative solutions for the deployment of UFB and 5G.

Telecom networks and FTTH

Welcome to ANGA COM 2019

The leading trade fair for broadband in Germany.